GRANTS RECEIVED
| Sanctioned Year | Name of the Funding Agency | Fund Received (in LAKHS) | Details of the Project | Project Investigator |
| 2020-21 | CIT TEQIP-III START-UP FUND | 0.15 | Spherical Hobbing Terrain Surveillance Robot | Mr K Karthik |
| 2019-2020 | AICTE – MODROBS | 12 | Modernization of Heatpower, refrigeration and fuel cell laboratory | Dr.K.Marimuthu |
| CIT Seed Money for Research | 0.936 | Performance Evaluation of ionano (INFs) Fluids as Absorbent in Vapour Absorption Refrigeration Systems” | Mr.S.Thirumurugan | |
| Tamil Nadu State Council for Science and Technology (TNSCST) | 0.075 | Optimization of Process Parameters of Abrasive Water Jet Machining On Stainless Steel 304 | Mr K Karthik | |
| 2018-2019 | CIT Seed Money for Research | 0.465 | Experimental Analysis of Flow and Vorticity Formation and its Impact on Heat Transfer Rate in a Double Cross Flow Heat Exchanger | Mr.D.P.Sam Solomon |
| CIT Seed Money for Research | 0.44 | Experimental Investigation on Double Pass Solar Air Heater with Thermal Energy Storage | Mr.H.Sivarathinamoorthy | |
| CIT Seed Money for Research | 0.33837 | Vibration Control using Smart Materials | Mr.G.Ramkumar | |
| Tamil Nadu State Council for Science and Technology (TNSCST) | 0.01 | Design and Fabrication of Orbi – Bicycle | Dr.G.Sureshkannan | |
| Tamil Nadu State Council for Science and Technology (TNSCST) | 0.075 | Computational and Experimental Analysis of Flow patterns in channels using Dye Visualisation | Mr.D.P.Sam Solomom | |
| 2017-2018 | RPS-NDF | 21 | Investigation of impact resistance of patch repaired aluminum – GFRP hybrid laminate using nano filler dispersed epoxy resin | Dr.V.Selladurai |
| AICTE | 5 | Grants for Organizing Conference | Dr.K.Marimuthu | |
| 2016 – 2017 | UGC – MINOR RESEARCH PROJECT | 3.7 | Investigation on Micro-structural and Mechanical Behaviour of Dual Phase Steel with Manganese using Image Analysis | Dr.G.SureshKannan |
| 2015-2016 | MHRD – FAST | 100 | Establishment of Centers for Training and Research in Frontier Areas of Science and Technology (FAST) | Dr.RajeshRanganathan |
| 2014 – 2015 | UGC&SIU, NORWAY – INCP | 95 | Advanced Nano Material for Clean Energy Application | Dr.G.SureshKannan |
| 2013 – 2014 | AICTE – MODROBS | 10 | Investigation of Optimization of Process Parameters in Machining of Metal Matrix Composites | Dr.R.Sivasubramanian |
| 2013 – 2014 | MHRD | 100 | Advanced Training & Research Centre of Excellence in Manufacturing Sciences – Establishment of centres for training and research | Dr.V.Selladurai Dr.RajeshRanganathan |
| 2013 – 2014 | DST – FAST TRACK SCHEME FOR YOUNG SCIENTIST | 20.12 | Design and Development of Innovative Product for Reduction of Foot Ulcer for Diabetic | Dr.RajeshRanganathan |
| 2013 – 2014 | AICTE – SEMINAR GRANT | 1.5 | Colour Control in Fly Ash as a Combined Function of Particle Size & Chemical Composition | Dr.N.RajamRamasamy |
| 2012 – 2013 | DST | 72 | Development & Evaluation of Personalized Advisory System for Management of Pests & Diseases of Potato in Nilgiris using Information & Communication Technologies | Dr.A.Kannammal Dr.RajeshRanganathan |
| 2012 – 2013 | AICTE – RPS | 13 | Design and Development of Natural Fiber Reinforcement Composite for Replacing RCC slabs | Dr.K.Marimuthu |
| 2012 – 2013 | AICTE – RPS | 18.23334 | Experimental and Finite Element Modelling of Piezo Electrically Actuated Macro Fiber Composites | Dr.K.Marimuthu Dr.K.Jayabal |
| 2012 – 2013 | AICTE – RPS | 20.5 | Investigation on Friction Surfacing of Titanium Alloy with Aluminium Matrix Composite Reinforced with B4C | Dr.N.Murugan Dr.G.Sureshkannan |
| 2012 – 2013 | DRDO | 18.66 | Investigation on the Effect of FSW Process Parameters on Metallurgical and Corrosion Properties of Naval Grade Steels | Dr.N.Murugan Dr.G.Sureshkannan |
| 2012 – 2013 | AICTE – RPS | 13.41 | Development of Multi – Sensor Fusion System for Humanoid Robots | Dr.V.Selladurai |
| 2011 – 2012 | AICTE – RPS | 9.8 | An Experimental Investigation on Performance and Emission Characteristics of Ethanol Fuelled Direct Injection Compression Ignition Engine with Split Injection Technology | Dr.A.S.Krishnan |
| 2011 – 2012 | AICTE – RPS | 14.8 | Trajectory Planning of 3 D.O.F Wire Controlled Rehabilitation Robot Arm for Upper Arm Post Stroke Treatment | Dr.N.RajamRamasamy |
| 2011 – 2012 | AICTE – MODROBS | 14.5 | Modernization of Internal Combustion Engines and Heat Transfer Laboratory | Dr.V.Selladurai Dr.A.S.Krishnan |
| 2011 – 2012 | UGC – MAJOR RESEARCH PROJECT | 10.68 | Real Time Simulation of Collaborative Product Data Management in Small and Medium Enterprises | Dr.R.Sivasubramanian |
| 2011 – 2012 | UGC – MAJOR RESEARCH PROJECT | 10.52 | Studies on Critical Process Parameters influencing the Quality of Prototypes in fused Deposition Modelling | Dr.K.Marimuthu |
| 2011 – 2012 | DST – FIST | 70 | Fund for Improvement of S&T Infrastructure in Universities and Higher Education Institutions | Dr.V.Selladurai |
| 2011 – 2012 | DST – INSPIRE FELLOWSHIP | 4.188 | Assured Opportunity for Research Career (AORC) | Dr.N.Murugan |
| 2010 – 2011 | DST – S&T | 8 | Haptic Devices & Tool Kits Geomagic Touch | Dr.Rajesh Ranganathan |
| 2010 – 2011 | ISHRAE – Students Project | 0.08 | Thermodynamic Analysis of HVAC Chilled Water Air Conditioning system using Exergy Topological Models | Dr.G.Sureshkannan |
| 2009 – 2010 | DST – SERC | 23.53 | Photosynthesis of Nanocrystalline TiO2 Thin Films by CDS/CDSE Quantum Dots for Solar Cell Applications | Dr.N.Murugan |
| 2009 – 2010 | AICTE – RPS | 3.25 | Kinematic Analysis of a Parallel Robot with three Degrees of Freedom with a Passive Segment using Virtual Instrumentation | Dr.N.RajamRamasamy |
| 2009 – 2010 | AICTE – RPS | 3.81 | Development of Automatic Job Defect Identification of Parts Defects using Image Acquisition System | Dr.P.V.Senthil |
| 2009 – 2010 | AICTE – MODROBS | 12.5 | Characterization of Elecro-Mechanical Systems | Dr.K.Marimuthu |
| 2008 – 2009 | AICTE – MODROBS | 15 | Modernization of Mechanical Engineering Labs | Dr.V.Selladurai |
| 2008 – 2009 | AICTE – RPS | 17 | Production and Characterization of FSW Al MMC for High Tech Structural and Functional Applications | Dr.N.Murugan |
| 2007 – 2008 | UGC – R&D | 8.5 | Production and Characterization of Nano Sized Semi-Conductor Crystallites of CDs and CD Te | Dr.N.Murugan |
| 2006 – 2007 | DRDO – NRB | 20.11 | Friction Stir Welding of Aluminium Metal Matrix Composites for Marine Application | Dr.N.Murugan |
| 2006 – 2007 | AICTE – RPS | 10 | Modelling and Optimization of Process Parameters of Wire EDM based on Robust Design for improved Surface Finish | Dr.R.Sivasubramanian |
| 2006 – 2007 | AICTE – RPS | 8 | Reliability Analysis of Software based Mechatronics System using Virtual Instrumentation | Dr.R.Amuthakkannan |
| 2006 – 2007 | TNSCST – Student Project Scheme | 0.05 | Development of RFID (Radio Frequency identification) Techniques for Lean Manufacturing using Lab View | Dr.R.Amuthakkannan |
| 2003 – 2004 | DST – FIST | 35 | Fund for improvement of Science and Technology Infrastructure | Dr.S.Dhandapani |
| 2003 – 2004 | UGC – MINOR RESEARCH PROJECT | 3.11 | Design and Development of Dynamic Agile Manufacturing System Simulator through Synchronous Principles | Dr.R.Sivasubramanian |
| 2003 -2004 | AICTE – MODROBS | 9.72 | Modernization of Metrology & Dynamics Lab | Dr.S.Dhandapani |
| 2003 – 2004 | AICTE – RPS | 10.5 | Analysis of Cutting Tool Flank Wear using Force Ratio and Evolutionary Techniques to improve Surface Finish | Dr.V.Selladurai Dr.N.Murugan |
| 2002 – 2003 | DST – FIST | 15 | Manufacturing System Simulator | Dr.V.Selladurai |
| 2001 – 2002 | AICTE – R & D | 7 | Plasma Transferred Arc Hardfacing Process Optimization for Enhancing Mechanical and Metallurgical Properties of Valves through Robust Design of Experiments | Dr.N.Murugan |
| 2000 – 2001 | UGC – R&D | 7 | Development of Computer Assisted Models for Prediction of Ferrite Content and Corrosion Resistance of Austenitic Stainless Steel Weldments and Cladings | Dr.N.Murugan |
| 2000 – 2001 | AICTE – TAPTEC | 6 | Colour Metallography of Stainless Steel Welding using Computer Assisted Image Processing | Dr.S.Dhandapani Dr.N.Murugan Dr.P.Koshy Mathews |
| 1999 – 2000 | AICTE – R & D | 4 | Development of Job-shop Scheduling through Parallel Processing and Hybrid Modelling for Optimal Performance | Dr.V.Selladurai |
| 1998 – 1999 | AICTE – MODROBS | 5 | Modernization of Mechanical Engineering Laboratories | Dr.S.Dhandapani |
| 1997 – 1998 | AICTE – R & D | 5 | Hardfacing Process Optimization through Robust Design of Experiments | Dr.R.Natarajan Dr.S.Dhandapani Dr.N.Murugan |
| 1996 – 1997 | AICTE – TECHNOLOGY FORECASTING | 3 | Development of Dynamic Intelligent Manufacturing System Simulator | Dr.V.Selladurai |
| 1996 – 1997 | AICTE – R & D | 7 | Development of Neural based FMS Simulator | Dr.V.Selladurai |
| 1995 – 1996 | AICTE – TAPTEC | 6 | Office Automation for COE office | Dr.V.Selladurai |
| 1995 – 1996 | AICTE – TAPTEC | 6 | Computer Integrated Manufacturing | Dr.V.Selladurai |
| 1994 – 1995 | AICTE – MODROBS | 5 | Modernization of Manufacturing Systems Lab | Dr.V.Selladurai |